Related Products
Featured Products
- Information
- Guide
- Comment
An advanced compound for all polished marble, limestone, and terrazzo. MRP™ easily removes light scratches from the surface and creates a true dazzling polish on even difficult-to-polish marble surfaces (such as green or black marble).
This product works on worn marble surfaces and those that have not responded to other marble polishing compounds or crystallizers. MRP does not require the use of weighted marble equipment and in many cases reduces the need for costly diamond honing.
Directions for use
Surface preparation: The surface must be clean and dry. Use a dust mop to remove loose debris and dirt. Remove any coatings or sealers, wash the floor, and remove any remaining soil using NCL HURRICANE™ Intensive Stone Cleaner.
Application: Use the NCL STONE BLAZER ™ and NCL AQUA MAGIC™ PAD or a dense polishing pad (high speed). Also have a mop bucket with clean water and a floor squeegee. MRP™ works best when the pad is loaded up. When opening the container, pour the liquid on the top into another container and save it for pour back into the MRP™ container when through. Place approximately 5 tablespoons (3 oz.) product onto the floor in a circle. Spray 4 trigger pulls of water from a spray bottle onto the MRP™. Place the NCL STONE BLAZER™ and pad onto the mixture and begin buffing in a slow, side-to-side motion. Work an area of approximately 3' x 3' (1 square meter). Make 4 complete passes and inspect the results. If satisfactory, move to the next area. If not, make more passes. Count the passes and make the same number of passes over the entire area. Add more paste and water as necessary. Use a squeegee to move all slurry to the next area being polished. After polishing an area of approximately 50 square feet (4.65 sq. m), rinse the area with NCL HURRICANE™ at 1:10 to remove all slurry residue.
2022 Copyright ELITE VDP COMPANY LIMITED.
