Related Products
Featured Products
- Information
- Guide
- Comment
Perfection™ is a cutting edge, technologically advanced pure virgin polymer system combined with a proprietary blend of synthetic waxes produces the most versatile floor coating.
This unique product exhibits excellent leveling, fast drying and curing. The extra hard film formation gives this product wearability advantages and the versatility to maintain the coating with low speed, conventional, high speed and ultra-high speed maintenance procedures. Recommended for all floors that will tolerate a water-based floor sealer/ finish.
Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.
Application: Using a clean mop or applicator apply a thin uniform coats of Perfection™ Advanced Floor Coating. Allow to dry for a minimum of 30 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.
High Speed Buffing and Burnishing: Perfection™ Advanced Floor Coating is an ideal product for use with high speed polishing or burnishing machines of 1000 rpm or higher. Prior to high speed buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an NCL Aqua Magic buffing pad. For spray buffing, mop-on or autoscubber restoring use a prefered NCL gloss restorer.
Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.
2022 Copyright ELITE VDP COMPANY LIMITED.
