#SIGN UP FOR CONSULTATION NOW
Related Products
Featured Products
- Information
- Guide
- Comment
Fast drying formula cleans wood floors to restore natural beauty and luster. Tacking with FastBreak™ cleans the surface, removing dust, dirt and grime and leaves no residue behind. Uses specially selected ingredients to remove soils from the wood surface.
Authorized UL Product
Floor Cleaning:
Sweep, vacuum and/or dust mop floor surface prior to cleaning with FastBreak™ Clean and Tack for optimum results. Dust mop floor surface using a untreated dust mop / microfiber dust mop.
Wet Screening:
- Mix FastBreak™ at a ratio of 4 parts water to 1 part FastBreak™ in a mop bucket or automatic scrubber. Use cool water only. Mount red or white cleaning pads.
- For an Autoscrubber: Autoscrub the floor surface in a single pass. Do not allow solution to stand on the floor surface. An individual with a pick-up mop or dry towels must follow behind the scrubber to pick up any water that is not picked up by the machine. Pay special attention to corners.
For a Swing Machine: Work in small areas. Apply solution to the floor using a mop or the automatic scrubber. Prep floor surface using a 175 rpm swing machine with a #120, #150, or Maroon floor pad. Use over lapping passes until floor surface is roughened evenly. Pick up dirty solution using a wet vacuum, mop and bucket, or automatic scrubber. - Rinse floor thoroughly and tack with FastBreak™. Allow floor surface to dry before walking on it.
Tacking With Towels:
- In a mop bucket / wringer, mix FastBreak™ Clean and Tack at a ratio of 4 parts water to 1 part FastBreak™. Use cool water only.
- Soak the towels in the bucket of diluted solution. Make sure that they are completely wet. Wring out a towel thoroughly to remove excess cleaner solution until it is just damp.
- Fold the dampened towel, place on the floor and wrap around a broom. Wipe the floor in long strokes without lifting the towel from the surface. Go with the grain of the wood. Reposition and refold towel frequently to expose a fresh clean surface. Repeat until the floor is completely free of dirt.
- Allow the floor surface to dry before walking on it.
Spot Cleaning With Towels:
- Wipe up liquid spills and sweep up dry soil spills as soon as possible.
- Mix FastBreak™ Clean and Tack at a dilution ratio of at a ratio of 4 parts water to 1 part Fast Break in a mop bucket / wringer. Use cool water only.
- Apply FastBreak™ Clean and Tack solution to towel and wring out thoroughly. Do not apply cleaning solution directly on the wood floor surface.
- Using the dampened towel, clean the area as required. Use a clean dry towel to wipe up excess cleaning liquid. Avoid leaving excess liquid on wood floor surface.
- Allow floor surface to dry before walking on it.
2022 Copyright ELITE VDP COMPANY LIMITED.
